1. Clean the surface
Ensure the area is dry and free of dust, oil, or wax.
2. Position the decal
Without removing the backing, place the decal where you want it. Use tape to hold it in place if needed.
3. Peel off the backing paper
Slowly remove the backing, making sure the decal sticks to the transfer film.
4. Apply the decal
Carefully press the decal onto the surface. Use a squeegee or credit card to smooth it out, starting from the center and moving outward.
5. Remove the transfer film
Gently peel off the transfer film at a 45° angle. If the decal lifts, press it back down and wait a few minutes before trying again.
6. Allow to set
Avoid washing the car or exposing it to rain within the first 72 hours.
❤️ Friendly Reminder:
For the best results, especially on large or curved surfaces, professional installation is recommended.
